Sailing | Rigging

Barton Marine Size 5 Vang Tackle 4:1 [05900]

Size 5 Vang Tackle 4:1 Upgrade your existing Vang system or use it as a boom preventer. Snap shackle fixings allow for quick and easy deployment. Professionally spliced and assembled. …Continue readingBarton Marine Size 5 Vang Tackle 4:1 [05900]

Barton Marine Genoa Slide w/Loop f/32mm Track [32301]

Genoa Slide with Loop for 32mm Track Have a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range…Continue readingBarton Marine Genoa Slide w/Loop f/32mm Track [32301]

Harken 13mm High-Load Trolley w/2X M4 Tapped Holes [IN6707.HL]

13mm High-Load Trolley with 2X M4 Tapped Holes This trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and…Continue readingHarken 13mm High-Load Trolley w/2X M4 Tapped Holes [IN6707.HL]

Taylor Made Tidy-Ups Boat Dock Line Holder – Standard Rails [1101]

Tidy-Ups Boat Dock Line Holder – Standard Rails Features: Rail mount UV resistant vinyl strap securely holds rope, cords, etc. Fits 1″ – 1-1/4″ Rails Not sold in pairs WARNING:…Continue readingTaylor Made Tidy-Ups Boat Dock Line Holder – Standard Rails [1101]

Barton Marine Size 3 Vang System [N03900]

Size 3 Vang System Features: Snap Shackle Head 24′ Line

C. Sherman Johnson Pulpit Anchor f/1″ Rail [29-501]

Pulpit Anchor for 1″ Rail This fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2″ hole). The…Continue readingC. Sherman Johnson Pulpit Anchor f/1″ Rail [29-501]

C. Sherman Johnson Eye to Deck Toggle Fitting [LS-2550]

Eye to Deck Toggle Fitting This fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees.

C Sherman Johnson Eye to Jaw Fitting [LS-2500]

Eye to Jaw Fitting This fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

C. Sherman Johnson Eye to Eye Adjustable Fitting [22-100]

Eye to Eye Adjustable Fitting This fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4″ and 1″.

C. Sherman Johnson Shore Adjuster f/3/16″ Wire [27-406]

Short Adjuster for 3/16″ Wire Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate. Specifications: 3/16″ Wire 1/4″ Pin…Continue readingC. Sherman Johnson Shore Adjuster f/3/16″ Wire [27-406]

(877) 908-5463

Shopify Tag: Sailing | Rigging