C.E. Smith – Page 2

C.E. Smith Jon Boat Support Bunk & Bracket Assembly [27850]

Jon Boat Support Bunk & Bracket Assembly 24″ carpeted bunk mounts crossways on the trailer tongue to support the flat bottom of a Jon boat. Adjustable from 5-1/2″ up to…Continue readingC.E. Smith Jon Boat Support Bunk & Bracket Assembly [27850]

C.E. Smith 5′ Roller Bunks [27710]

5′ Roller Bunk Roller bunks make loading and unloading small craft at very short or even dry ramps easy. Great for ramps where it is not practical to float the…Continue readingC.E. Smith 5′ Roller Bunks [27710]

C.E. Smith 4′ Roller Bunks [27700]

4′ Roller Bunk Roller bunks make loading and unloading small craft at very short or even dry rams easy. Great for ramps where it is not practical to float the…Continue readingC.E. Smith 4′ Roller Bunks [27700]

C.E. Smith Spring Hanger Bracket Kit Bolt-On [25006GA]

Spring Hanger Bracket Kit Bolt-On Use this spring bolt on hanger kit to mount your trailer springs. Includes: 2 bolt-on front spring hangers 2 bolt-on rear slipper spring hangers 2…Continue readingC.E. Smith Spring Hanger Bracket Kit Bolt-On [25006GA]

C.E. Smith Axle Tie Plate Kit f/2″ Square Axle [23103]

Axle Tie Plate Kit f/2″ Square Axle This kit has everything you need to mount fresh springs to a fresh axle. Includes: 2 galvanized tie plates 4 yellow zinc plated…Continue readingC.E. Smith Axle Tie Plate Kit f/2″ Square Axle [23103]

C.E. Smith 9/16″-18 x 3-1/2″ Shackle Bolts [11031A]

Shackle Bolts & Lock Nuts – 3-1/2″ Use with heavy duty 9/16″ eye springs and spring hanger brackets. Fluted shank prevents the bolt from turning in the bracket, preventing bracket…Continue readingC.E. Smith 9/16″-18 x 3-1/2″ Shackle Bolts [11031A]

C.E. Smith Axle Tie Plate Kit f/1-1/2″ Square Axle [23102]

Axle Tie Plate Kit f/1-1/2″ Square Axle This kit has everything you need to mount fresh springs to a fresh springs to a fresh axle. Includes: 2 galvanized tie plates…Continue readingC.E. Smith Axle Tie Plate Kit f/1-1/2″ Square Axle [23102]

C.E. Smith Axle Tie Plate Kit f/1-3/4″ Round Axle [23000]

Axle Tie Plate Kit f/1-3/4″ Round Axle This kit has everything you need to mount fresh springs to a fresh axle. Includes: 2 galvanized tie plates 4 yellow zinc plated…Continue readingC.E. Smith Axle Tie Plate Kit f/1-3/4″ Round Axle [23000]

C.E. Smith Spindle Nut Kit [11065A]

Spindle Nuts Replacement spindle nuts for 1″ axle shaft. Includes: Two 1″ shaft spindle nuts Two 1″ shaft washers Two 1-3/4″ long cotter pins Sold in pairs.

C.E. Smith Backing Plate f/70 Series Rod Holders [53673]

Backing Plate for 70 Series Rod Holders Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme…Continue readingC.E. Smith Backing Plate f/70 Series Rod Holders [53673]

(877) 908-5463

Shopify Vendor: C.E. Smith